INDUSTRIAL 24-10.00
SPEC SHEET
CRITICAL DIMENSIONS
Cross-section drawing of the K-R-2410 rim assembly. Five reference dimensions (A–E) are CNC-machined to the tolerances called out in the table and verified on a 5-axis CMM before every unit ships.
| REF | DIMENSION | VALUE | TOLERANCE |
|---|---|---|---|
| A | Rim base flange-to-flange | 316.4 mm | ±0.50 mm |
| B | Inner flange ⌀ | 609.6 mm | ±0.30 mm |
| C | Outer flange ⌀ | 613.6 mm | ±0.30 mm |
| D | Bead seat ⌀ | 507 mm | ±0.20 mm |
WHEEL-END ANATOMY
The complete INDUSTRIAL 24-10.00 wheel-end is a five-piece assembly. Every Kelios rim ships as a matched set — rim base, lock ring, side rings, and bead seat band — with the OEM-supplied hub remaining factory original.
FINITE ELEMENT ANALYSIS
Every Kelios rim design is validated under 1.4× rated load in a Von Mises FEA solver before tooling is cut. The K-R-2410 was meshed at refined element size with concentration at the lock-ring seat and bead radii — the two locations where field failures historically initiate.
NEED THE FULL 142-PAGE INDUSTRIAL 24-10.00 SPEC PACK?
The complete K-R-2410 catalog ships as a signed PDF with all five component drawings, the FEA report, material certificates, and a heat-lot traceable QC sheet for every unit you order.