57" THREE-ITEM STYLE LOCK RING
SPEC SHEET
CRITICAL DIMENSIONS
Cross-section drawing of the K-LR-3I57 rim assembly. Five reference dimensions (A–E) are CNC-machined to the tolerances called out in the table and verified on a 5-axis CMM before every unit ships.
| REF | DIMENSION | VALUE | TOLERANCE |
|---|---|---|---|
| A | Cross-section width | 58.7 mm | ±0.20 mm |
| B | Heel thickness | 14 mm | ±0.10 mm |
| C | Hook profile taper angle | 45° | ±0.5° |
| D | Lock-ring seat ⌀ | 1 395.4 mm | ±0.30 mm |
WHEEL-END ANATOMY
The complete 57" THREE-ITEM STYLE LOCK RING wheel-end is a five-piece assembly. Every Kelios rim ships as a matched set — rim base, lock ring, side rings, and bead seat band — with the OEM-supplied hub remaining factory original.
FINITE ELEMENT ANALYSIS
Every Kelios rim design is validated under 1.4× rated load in a Von Mises FEA solver before tooling is cut. The K-LR-3I57 was meshed at refined element size with concentration at the lock-ring seat and bead radii — the two locations where field failures historically initiate.
NEED THE FULL 158-PAGE 57" THREE-ITEM STYLE LOCK RING SPEC PACK?
The complete K-LR-3I57 catalog ships as a signed PDF with all five component drawings, the FEA report, material certificates, and a heat-lot traceable QC sheet for every unit you order.